PEK-Z10

• with integrated Z10 cable break monitoring unit

• with green halogen-free cable

For signalling the presence of an electrically conductive liquid caused, for example by burst 
pipes.

Plate electrodes can, for example, be used on normally dry floors or false ceilings or in 
normally dry pipeline and cable ducts.

If the two electrode plates of a plate electrode come into contact with an electrically 
conductive liquid (e.g. water, acid etc.), an electrical contact is made and an alarm signal 
given.

Electrode plates, material: stainless steel 316 Ti

The plate electrode is fitted with two separate electrodes in the form of two electrode plates: 
1 control electrode and 1 earth electrode. As soon as a trace of a conductive liquid creates 
a conductive path between the two electrode plates, a control current flows from the 
corresponding electrode relay. The latter is then energised and a contact made.

The PE-Z10 or PEK-Z10 plate electrode or the plate electrodes combination PE + PE-Z10 or 
PE + PEK-Z10 may only be connected to the Leckstar 101 electrode relay. The connection 
must be made in line with the circuit diagrams.

Max. length of connecting cable between plate electrode and electrode relay: 1,000 m.