Jola Spezialschalter K. Mattil & Co. KG
Klostergartenstraße 11-20
D-67466 Lambrecht
Phone: +49 63 25 / 188-01
 
Level controllers Leakage detectors Other Jola products Search via product names Control of the chemical resistance
General information on Jola Quality management system Addresses: Jola and its agents Help on CD-ROM catalogue
Suspension electrode for use in potentially explosive atmospheres

EL/Z6V2/EHW/NL1/20/2/PVDF/HB/1/Ex-1G
II 2 G EEx ia IIC T6 

  • with integrated Z6V2 cable break monitoring unit
 
  • - with electrode rods made of Hastelloy B
- with white PTFE cable

 
Picture 2
For use in intrinsically safe circuits in potentially explosive atmospheres in categories 
Zone 1 or 2.

EC type examination certificate: INERIS 03ATEX0152


For signalling the presence of an electrically conductive liquid caused, for example by burst 
pipes.

If the two electrode rods of a suspension come into contact with an electrically conductive 
liquid (e.g. water, acid etc.), an electrical contact is made and an alarm signal given.

Available electrode rods:
- stainless steel 316 Ti
- Hastelloy C
- Hastelloy B
Control electrode 1
Earth electrode 1
Electrode rod material Hastelloy B
Diameter of the electrode rods 3 mm
Electrical connection /
Connecting cable 
white PTFE cable, 2 x 0,75
Cable length 
2 metres, longer cable on request
Mounting orientation vertical
Housing 
PVDF, 20 mm dia. x approx. 80 mm high
Temperature resistance 
- 20° C to + 80° C
Pressure resistance 
for pressureless applications only,
for use under atmospheric conditions only
Documents for application
in explosive atmospheres 		EC type examination certificate [PDF]
EC Declaration of Conformity [PDF]
Installation, operating and maintenance instructions [to the language selection]		 
Available connecting cable:
- PVC connecting cable or
- CM connecting cable or
- PTFE connecting cable

Version with electrode rods made of:
- stainless steel 316 Ti
- Hastelloy C or
- Hastelloy B and/or
with housing made of PVDF or PTFE on request.

Mounting accessories:
Stuffing glands,and flange with stuffing glands on request
 
The suspension electrode is fitted with two separate electrodes in the form of two electrode 
rods: 1 control electrode and 1 earth electrode. As soon as a trace of a conductive liquid 
creates a conductive path between the two electrode rods, a control current flows from the 
corresponding electrode relay. The latter is then energised and a contact made.

The suspension electrode should be connected to electrode relay 
Leckstar 101/Ex  I (M1) / II (1) GD [EEx ia] I / IIC.

Max. cable length between electrode relay and electrode(s):
see installation, operating and maintenance instructions
Measure drawing
Top