![]() |
Jola Spezialschalter K. Mattil
& Co. KG
Klostergartenstraße 11-20 D-67466 Lambrecht Phone: +49 63 25 / 188-01 |
Floating switch
SPH/S3/K/SIL
|
|
![]() |
|
For applications up to max. AC 250 V Application in liquids with a specific density >=7 g/cm³ |
|
| Brochure Mercury-free floating switches and immersion probes [PDF] | |
|
|
|
| Switching voltage AC min. | 24 V |
| Switching voltage AC max. | 250 V |
| Switching voltage DC min. | 24 V |
| Switching voltage DC max. | 250 V |
| Switching current AC min. | 20 mA |
| Switching current AC max. | 3,000 mA |
| Switching current AC max. (inductive loads) |
1,000 mA |
| Switching current DC min. | 20 mA |
| Switching current DC max. | 100 mA |
| Switching capacity AC max. | 350 VA |
| Contact |
ball-operated microswitch, potential-free changeover contact |
| Float material | PP |
| Seal material | FPM |
| Float protection class | IP 68 |
| Float form | ball float |
| Float diameter | 85 mm |
| Mounting orientation | horizontal or vertical |
| Mounting | from the top or from the side |
| Connecting cable |
red-brown silicone cable, 3 x 0,75 |
| Application range of
the connecting cable |
for water and certain other liquids |
Connecting cable length |
1 metre, other cable lengths on request. When ordering, please always state the desired cable length and cable type. |
| Temperature application range |
0° C to + 85° C |
| Max. immersion depth of the float |
max. 10 metres head of water at + 20° C |
|
|
|
Options: Seal material: FPM; on request: EPDM Optional extras: stuffing glands and fixing weights made of brass, stainless steel 316 Ti or PP |
|
This floating switch is designed for mounting from the side or from the top. To ensure a correct switching the cable must be fixed at the required height using a stuffing gland, for example, in the case of mounting from the side or using a fixing weight, for example, in case of mounting from the top. This unit is not suitable for use in turbulent liquids (e.g. in stirrer tanks).
|
|
| Measure drawing |
| Top |