Jola Spezialschalter K. Mattil & Co. KG

Plate electrode WDX-Z10
with integrated Z10 cable break monitoring unit
with black PVC cable

For signalling the presence of an electrically conductive liquid caused, for example by burst pipes. Plate electrodes can, for example, be used on normally dry floors or false ceilings or in normally dry pipeline and cable ducts. If the two electrode plates of a plate electrode come into contact with an electrically conductive liquid (e.g. water, acid etc.), an electrical contact is made and an alarm signal given. Electrode plates: 2 plates made of stainless steel 316 Ti, 25 mm Ø Weight of electrode: approx. 630 g
Brochure Conductive leakage detectors of the Leckstar range [PDF]

Control electrode	1
Earth electrode	1
Electrical connection / Connecting cable	black PVC cable, 2 x 0,75
Cable length	2 metres, longer cable on request; halogen-free connecting cable on request
Housing	PP and cast resin
Temperature resistance	- 20° C to + 60° C
Documents	Installation, operating and maintenance instructions [PDF]

Optional: mounting stand
The WDX-Z10 plate electrode is fitted with two separate electrodes in the form of two electrode plates: 1 control electrode and 1 earth electrode. As soon as a trace of a conductive liquid creates a conductive path between the two electrode plates, a control current flows from the corresponding electrode relay. The latter is then energised and a contact made. The WDX-Z10 plate electrode may only be connected to the Leckstar 101 electrode relay. Max. length of connecting cable between WDX-Z10 and electrode relay: 1,000 m.

	Jola Spezialschalter K. Mattil & Co. KG Klostergartenstraße 11-20 D-67466 Lambrecht Phone: +49 63 25 / 188-01

WDX-Z10