Capacitive leakage detectors of the Leckmaster range

Capacitive leakage detectors for electrically conductive and electrically non-conductive liquids

- for installation in normally dry rooms

Units:

Capacitive leakage detectors
of the Leckmaster range

with integrated cable break monitoring

for electrically conductive and electrically non-conductive liquids; can basically be used for the detection of all low-viscosity liquids for such tasks as signalling the presence of fuel oil on the floor of a tank room or in a collection tub located underneath a fuel oil burner.

The Leckmaster leakage detectors consist of 2 components:

• a COW/L or OWE 2/C sensor
  
  and

• a Leckmaster 101 relay.

The COW/L and OWE 2/C sensors are designed for connection to the Leckmaster 101 relay. They work on a capacitive basis. If several sensors are used, a separate Leckmaster 101 relay is required for each sensor.

The COW/L and OWE 2/C sensors can be mounted either

• upright on the floor (using the stand offered by JOLA as an option)
  
  or
  
  
• freely suspended by their cable above the floor.
  Please follow the installation, operating and maintenance instructions.

The COW/L and OWE 2/C sensors should only be used in normally dry surroundings - e.g. in collection rooms or collection tubs.

The Leckmaster 101 relay is designed for U-bar mounting or surface mounting. The various operating statuses arer shown by coloured LEDs.

Areas of application:
All organic and inorganic liquids with specific dielectric constants between 1.8 and 109.
Prerequisite is that these liquids, dependent on the ambient temperature, are present in fluid form, and that the sensors to be used will be sufficiently wetted. Response height is approx. 12 mm.